The Mechanical and Physical Properties of the British Standard En Steels (B.S. 970 - 1955)
En 1 to En 20
- 462 pages
- English
- PDF
- Available on iOS & Android
The Mechanical and Physical Properties of the British Standard En Steels (B.S. 970 - 1955)
En 1 to En 20
About This Book
The Mechanical and Physical Properties of the British Standard En Steels, Volume 1: En 1 to En 20 provides information pertinent to the most commonly used range of steels in the United Kingdom. This book discusses the properties of steels and the equivalent foreign specifications. This volume begins with an overview of the application of En 1 steels wherein good machinability is the prime consideration. This text then provides the specification, properties, and applications of En 2 steel, which is mild steel suitable for general use for lightly stressed parts. This book considers the general purpose of En 3 series for welded or riveted structures, forgings, machined parts, and hot pressing. This text discusses as well the uses of En 4 steel in agricultural machinery especially where superior toughness is required. Finally, the machinability of En 20 is discussed. This book is a valuable resource for engineers, designers, and all users of steel.
Frequently asked questions
Information
Table of contents
- Front Cover
- En 1 to En 20
- Copyright Page
- Table of Contens
- FOREWORD
- INTRODUCTION
- NOTES ON THE USE OF THE TABLES
- REFERENCES
- LIST OF ABBREVIATIONS
- En 1. FREE CUTTING STEEL FOR MACHINING
- En 2. COLD FORMING STEEL
- En 3. "20" CARBON STEEL
- En 4. '25'' CARBON STEEL
- En 5. "30'' CARBON STEEL
- En 6. BRIGHT CARBON STEEL
- En 7. SEMI-FREE CUTTING CARBON STEEL
- En 8. "40" CARBON STEEL
- En 9. "55" CARBON STEEL
- En 10. "55" CARBON, 3/4 PER CENT NICKEL STEEL
- En 11. "60" CARBON—CHROMIUM STEEL
- En 12. 1 PER CENT NICKEL STEEL
- En 13. MANGANESE—NICKEL—MOLYBDENUM STEEL
- En 14. CARBON—MANGANESE STEEL
- En 15. CARBON—MANGANESE STEEL (HIGHER TENSILE)
- En 16. MANGANESE—MOLYBDENUM STEEL
- En 17. MANGANESE—MOLYBDENUM STEEL (HIGHER MOLYBDENUM)
- En 18. I PER CENT CHROMIUM STEEL
- En 19. I PER CENT CHROMIUM—MOLYBDENUM STEEL
- En 20. I PER CENT CHROMIUM—MOLYBDENUM STEEL (HIGHER MOLYBDENUM)
- Appendix I: Electrical Resistivity (g), Thermal Conductivity(k) and Lorenz Function (L) of 22 Steels (N.P.L. Data)
- Appendix II: Comparison of Elongation on L=4 √A and L=5.65 √A
- Appendix III: Approximate Relationship between Various Hardness Numbers
- Appendix IV: Tons per Square Inch to Kilogrammes per Square Millimetre Tons per Square Inch to Pounds per Square Inch
- Appendix V: Temperature Conversion Table
- Appendix VI: Comparison of Impact Values Obtained with the British Standard Izod Test and Various Alternative Methods of Testing