Advanced Material Science And Engineering - Proceedings Of The 2016 International Conference (Amse2016)

Proceedings of the 2016 International Conference

Dahai Ren, Hadi Haeri

• Publisher: WSPC
• Year: 2016
• ISBN:
  9789813141629
• Topic: Tecnología e ingeniería
• Subtopic: Ciencias aplicadas

The book provides a comprehensive overview of the authors' works which include significant discoveries and pioneering contributions on Materials Process Engineering, Materials Physics and Chemistry, Emerging Areas of Materials Science, and so on. AMSE2016 is an influential international conference for its strong organization team, dependable reputation and a wide range of sponsors from all over the world.

Contents:

• Nano Science and Technology
• Advances in Polymer Science and Technology
• Material Based Engineering Design and Control
• Material Characterization
• Materials Modeling and Simulation
• Materials Engineering and Performance
• Materials Science and Engineering

Readership: Scientists from materials process engineering, material physics and chemistry.
Key Features:

• The conference attracts over 100 participants from various fields
• The papers are selected via strict peer review

Table of contents

• Cover Page
• Title
• Copyright
• Preface
• Committee of AMSE2016
• Keynote Speaker
• General Chair
• Table of Content
• Section 1. Nano Science and Technology
• Thin Polymer Films Containing Carbon Nanostructures
• The Effect of the Electrodes Area Ratio on TiO2 Nanotube Arrays Yield in Anodization
• Co3O4 NPs Embedded in N-doped Carbon Fibers as a Bifunctional Electrocatalyst for Oxygen Reduction and Evolution Reactions
• Effect of Carbon-based Nanofillers on Electrical Properties of Epoxy/Polyetherimide Composites
• Section 2. Advances in Polymer Science and Technology
• The Electropolymerization and Characterizations of Acid Red Dye Doped Polyaniline
• Radiation Crosslinking of Polyurethane Enhanced by Introducing Terminal Double-Bonds
• Structure Confirmation and Properties of Poly (Dimethylsiloxane-Codiethylsiloxane) Copolymer
• Synthesis and Phase Behaviors of Supramolecular Liquid Crystals Based on 4-Octyldecyloxybenzoic Acid and 4-Hexadecyloxy Benzoic Acid in Binary Mixtures
• Comparative Study on Accelerated Thermal Ageing of Vegetable Insulating Oil-paperboard and Mineral Oil-paperboard
• Effects of Several Flame Retardants and Curing Agents on the Fire and Mechanical Properties of Epoxy Resin
• The Preparation of a Reactive Emulsifier and Its Application in Emulsion Polymerization
• Optimization of Refining Craft for Vegetable Insulating Oil
• Mechanical Properties of Palm Fiber Mattress
• Research on Optimization of GLCM Parameter in Cell Classification
• Synthesis and Characterization of Benzotriazole-based Conjugated Polymers for Bulk-heterojunction Solar Cells
• Section 3. Material Based Engineering Design and Control
• Design and Optimization of Slot Aluminum Alloy Connectors of Photovoltaics Applied to High-Rise Building Facades
• Thermal Diagnosis of Rural Power Grid Distribution Substation Electrical Joints
• Research on New Method of Windshield Microwave Heating
• The Study of New Technology of Tempered Glass—Using Microwave Heating Method
• Effect of Inertial Force on Thermal Elastohydrodynamic Lubrication of Oil Film Bearing in Rolling Mill Lubricated by the Oil-water Two-phase Flow
• Non-axisymmetric Dynamic Buckling of Cylindrical Shells under Axial Step Load
• Dynamic Buckling of Elastic Bar under Axial Impact Based on Finite Difference Method
• Heat Preservation Performance Attenuation of the Exterior Wall Thermal Insulation Materials Commonly Used in South of Jiangsu Area
• The Goods Upstairs Car Innovative Design
• Removable Type Expansion Bolt Innovative Design
• The Brackets Design and Stress Analysis of a Refinery’s Hot Water Pipeline
• Model-based Sliding Mode Controller of Anti-lock Braking System
• Development of Control System for Hydrolysis Crystallization Process
• The Research on Optimization of Edge Drop Control for Cold Tandem Rolling Mill
• Multi-factor Effects on the Durability of Recycle Aggregate Concrete
• Recovery of Iron from Copper Tailings by Direct Reduction
• Design of Wireless Power Transfer System Using E-class Amplifier
• Flatness and Edge Drop Decoupling Control for the Tandem Cold Rolling Mill
• Shape Control of Space Thin-walled Structures by Using Thermal Actuators
• Section 4. Material Characterization
• Syntheses and Characterization of Chiral Arm Liquid Crystal—Containing Active Group
• The Overheating Cause Analysis of Permanent Magnet Governor and Countermeasures
• Synthesis and Characterization of N-hydroxypropyl-2-indolyl Fulgimide Photochromic Material
• Raman and Photoluminescence Spectroscopy of Laser Irradiated Sites of Fused Silica: Comparison between Bulk and Surface Damage
• Synthesis and Characterization of Novel Perylene Diimide
• A Novel Method for Measuring Electrical Conductivity of High Insulating Oil Using Charge Decay
• Dynamic Buckling on Rectangular Plates under Axial Step Load
• Study on De-noising Technology of Radar Life Signal
• The Electrochemical Noise Study of TA10 Heat Exchanger Tubes in the Tri-effect Continuous Evaporation and Crystallization Device
• Application of Ultrasonic Phased Array Technology to the Detection of Defect in Composite Stiffened-structures
• Section 5. Materials Modeling and Simulation
• 3-D Transient Heat Transfer Analysis of Slab Heating Characteristics in a Reheating Furnace in Hot Strip Mills
• Constitutive Model Modification of Titanium Alloy Ti-6Al-4V Based on Dislocation Pile-up Theory
• Study on Ply Orientation Optimum Design for Composite Material Structure Based on Genetic Algorithm
• Numerical Simulation of Rheology Character of Polymer Extrusion Flow in the Micro Channel
• Modelling the Hysteresis Properties of an Orthogonal Core Controllable Reactor under Dc-biased Conditions
• An Ab Initio Study of Charge Carrier Transport of Triphenylene Derivatives 359
• Numerical Simulation of Erosion in Different Diameter Ratio Sudden Contraction Pipe
• Numerical Simulation for Crushing of Shell Material about 58SiMn Influenced by Brittle Zone
• DFT Study of the Oxygen Vacancy Role for CO2 Adsorption on Bi2MoO6 (010) Surface
• A Prediction of the Damping Properties of Hindered Phenol AO-60/Polyacrylate Rubber (AO-60/ACM) Composites through Molecular Dynamics Simulation
• The Temperature Effect on the Diffusion Processes of 32% EVOH Membrane: Molecular Dynamic Simulation
• Cleaning Robot for Solar Panels in Solar Power Station
• Section 6. Materials Engineering and Performance
• A Study of Ti(C, N)-TiB2 Cermets Fabricated by the Self-propagating High-temperature Synthesis
• Experimental and Numerical Studies of Shear Fracture in Concrete Specimens
• Modeling and Experiment of Melt Impregnation of Continuous Fiber-reinforced Thermoplastic with Pins
• Preparation of PAN Fiber Supported Iron (II) Phthalocyanine Complex and Its Photocatalytic Performance
• Rheological Properties and Foaming Behavior of Poly(Ethylene Terephthalates) Modified with Pyromellitic Dianhydride
• Electrochemical Deposition of Metal-ceramic Composite Coating
• Research on Annealing of Sapphire Single Crystal Growth by Kyropoulos Method
• Different Distribution Comparison for Multi-state Failure Process
• Based on Weibull Information Fusion Analysis Semiconductors Quality the Key Technology of Manufacturing Execution Systems Reliability
• Thermal Analysis and Cooling Optimization of the Magnetorheological Brake
• Experimental Study on Performance of Separator with Three-segment Coalescence Plates
• Precipitation Behavior of the Second Phase in V-Ti Microalloy TRIP Steels at Different Conditions
• Effect of Co-doping Y and Gd on the Microstructure and Mechanical Strength of AM60B Alloy
• Dynamic Buckling of Composite Cylindrical Shells
• Effect of Multi-repair Welding on Fatigue Performance of Aluminum Alloy Profile Welded Joint
• A New Fourier-temperature Finite Element for Thin-walled Tubes
• Inter-pass Thermal-vibration Stress Relief on Multi-pass Welded Joints of DH 36 Steel
• Section 7. Materials Science and Engineering
• Spin Entangling Effects of Electron and Nucleus on Hopping Transfer in Organic Semiconductors
• Effect of Permeability of Tipping Paper on Cigarette Burning Temperature and the Property of Mainstream Smoke
• Microstructure Evolution of SiC Matrix in PIP-C/SiC Composites after Annealing at Different Temperatures
• Application of Absorbable Hemostatic Materials Observed in Thyroid Operation
• The Synthesis of a Novel Swallow-tailed Glycol and Linear Alkoxy-substitued Dibenzocoronene Tetracarboxdiimide Derivatives
• Multi-factor Analysis of Pre-control Fracture Simulations about Projectile Material
• Enhancement Effect of h-BN and Graphene Films on the Thermal Conductivity of Si Substrate
• Research on the Distribution of Magnetic Particles by Changing the Rate of the Radius of the Pole and the Length between Two Poles
• Comparing the Effect of 3 Kinds of Different Materials on the Hemostasis of the Central Venous Catheter
• On the Role of Interfacial Reaction in the Wetting in Metallic Systems
• Percolation Blocking as the Origin of Organic Magneto-resistance
• Reactively Sputtered Amorphous Zr-Si Films Serving as Barrier Layer for Copper Interconnect
• Bandgap-reduced NaNbO3 by Double-anion Codoping for Visible Light Photocatalysis
• Insights into the Self-assembly of Two Diamine Derivatives Low Molecular Mass Organogelators in Quasi-solid-state Electrolytes