3D Concrete Printing Technology

Construction and Building Applications

Jay G. Sanjayan,Ali Nazari,Behzad Nematollahi

• Editorial: Butterworth-Heinemann
• Año: 2019
• ISBN:
  9780128154823
• Categoría: Tecnología e ingeniería
• Categoría: Construcción e ingeniería arquitectónica

3D Concrete Printing Technology provides valuable insights into the new manufacturing techniques and technologies needed to produce concrete materials. In this book, the editors explain the concrete printing process for mix design and the fresh properties for the high-performance printing of concrete, along with commentary regarding their extrudability, workability and buildability. This is followed by a discussion of three large-scale 3D printings of ultra-high performance concretes, including their processing setup, computational design, printing process and materials characterization. Properties of 3D-printed fiber-reinforced Portland cement paste and its flexural and compressive strength, density and porosity and the 3D-printing of hierarchical materials is also covered.

• Explores the factors influencing the mechanical properties of 3D printed products out of magnesium potassium phosphate cement material
• Includes methods for developing Concrete Polymer Building Components for 3D Printing
• Provides methods for formulating geopolymers for 3D printing for construction applications

Índice

• Cover image
• Title page
• Table of Contents
• Copyright
• Dedication
• List of Contributors
• Preface
• Acknowledgments
• Chapter 1. 3D Concrete Printing for Construction Applications
• Chapter 2. Performance-Based Testing of Portland Cement Concrete for Construction-Scale 3D Printing
• Chapter 3. Building Applications Using Lost Formworks Obtained Through Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete
• Chapter 4. Fiber-Reinforced Cementitious Composite Design with Controlled Distribution and Orientation of Fibers Using Three-Dimensional Printing Technology
• Chapter 5. Properties of 3D-Printed Fiber-Reinforced Portland Cement Paste
• Chapter 6. 3D Concrete Printing: Machine Design, Mix Proportioning, and Mix Comparison Between Different Machine Setups
• Chapter 7. Investigation of Concrete Mixtures for Additive Construction
• Chapter 8. Method for the Enhancement of Buildability and Bending Resistance of Three-Dimensional-Printable Tailing Mortar
• Chapter 9. Mechanical Properties of Structures 3D-Printed With Cementitious Powders
• Chapter 10. Factors Influencing the Mechanical Properties of Three-Dimensional Printed Products From Magnesium Potassium Phosphate Cement Material
• Chapter 11. Development of Powder-Based 3D Concrete Printing Using Geopolymers
• Chapter 12. Interlayer Strength of 3D Printed Concrete: Influencing Factors and Method of Enhancing
• Chapter 13. Properties of Powder-Based 3D Printed Geopolymers
• Chapter 14. Design 3D Printing Cementitious Materials Via Fuller Thompson Theory and Marson-Percy Model
• Chapter 15. Towards the Formulation of Robust and Sustainable Cementitious Binders for 3D Additive Construction by Extrusion
• Chapter 16. Studying the Printability of Fresh Concrete for Formwork-Free Concrete Onsite 3D Printing Technology (CONPrint3D)
• Chapter 17. Construction 3D Printing
• Chapter 18. Properties of Extrusion-Based 3D Printable Geopolymers for Digital Construction Applications
• Chapter 19. Industrial Adoption of 3D Concrete Printing in the Australian Market: Potentials and Challenges
• Index