Dental Materials in Operative Dentistry

Christina Mitchell

• Publisher: Quintessence Publishing
• Year: 2019
• ISBN:
  9781850973515
• Edition: 1
• Topic: Medicine
• Subtopic: Dentistry

In such a rapidly changing field, dental students and practitioners need up-to-date information on a wide range of restorative materials available for use in operative dentistry. This book concisely outlines the clinical advantages and disadvantages as well as indications and contraindications of different materials. Topics include finishing and polishing restorations and the use of dental curing lights.

Chapter 1

Resin Composites

Aim

The aim of this chapter is to improve understanding of the wide range of resin composites (including ormocers and ceromers) available for the restoration of anterior and posterior teeth.

Outcome

Readers will gain knowledge of the advantages and disadvantages of each of the many different types of resin composite materials available and how properties relate to material composition.

Introduction

Resin composites may be used to restore anterior and posterior teeth. When used anteriorly, aesthetics are often of primary concern, requiring durable high surface polish, excellent colour matching and colour stability. Posteriorly, where biting forces may be up to 600 N, high compressive and tensile strength and excellent wear resistance are required. Both anterior and posterior resin composites require a reliable bond to enamel and dentine to prevent leakage between the tooth and the restoration and to provide dimensional stability. Resin composites were first used in dentistry in the 1960s, and since then many different types of material have been developed for varying clinical indications.

Indications

Anterior Composites

Resin composite is used as a direct restorative material for the replacement of missing dentine and enamel. It is also used to alter the shape and colour of anterior teeth to enhance aesthetics. It can be used to close diastemas and alter crown length and contour, and it can be placed as a labial veneer to mask intrinsic discolouration and structural defects in a tooth.

Posterior Composites

Resin composite is also increasingly used as a direct restorative material for the replacement of missing dentine and enamel in posterior teeth. It is chosen as an aesthetic alternative to dental amalgam as a definitive restorative material for load-bearing occlusal and proximal preparations, for the restoration of tooth wear and as a core build-up material. It can also be used indirectly, to produce laboratory-made inlays and onlays that are then bonded to the prepared tooth using a resin composite luting cement and dentine adhesive systems. Increasing numbers of patients are requesting alternatives to dental amalgam in response to much-publicised concerns regarding the effects of mercury released from dental amalgam (see Chapter 5, pages 80–81, Safe use and disposal). Resin composite is not, however, an ideal restorative material in all clinical situations.

Composition of Resin Composites

Resin composite comprises resin matrix and glass filler particles, which polymerise (set) by chemical or light initiation. The glass filler particles are coated with a coupling agent to improve the bond to the matrix. In addition, initiators and accelerators are required for polymerisation. Inorganic oxide pigments are added in small amounts to achieve the various shades required.

Resin Matrix

Most resin composites are based on bisphenol-A-glycidyl methacrylate (bis-GMA) or urethane dimethacrylate (UDMA). Other resins used to alter viscosity and handling include triethylene glycol dimethacrylate (TEGDMA) and bisphenol-A-polyethylene glycol diether dimethacrylate.

Glass Filler Particles

Various filler particles are used by dental manufacturers, including silicon dioxide, aluminium oxide, barium, zirconium oxide, borosilicate and barium aluminium silicate glasses. The greater the amount of filler particles, the better the physical and mechanical properties of the material, up to a maximum level. Beyond this, the resin becomes too viscous to use clinically.

Filler particles give the following properties:

• increased wear resistance
• increased hardness
• increased translucency
• decreased polymerisation contraction
• decreased coefficient of thermal expansion.

Resin composites may be classified according to the size and distribution of the filler particles (Table 1-1).

Table 1-1 Classification of resin composites

Classification	Range of particle sizes (μm)	Filler (% by volume)
Hybrid	0.04–3.0	60–70
Microfill	0.04–0.2	32–50
Condensable (packable)	0.04, 0.2–20	59–80
Flowable	0.04, 0.2–3.0	42–62
Nanohybrid (nanocomposite)	0.002–0.075	68–78.5

Coupling Agents

Silanes are the most commonly used coupling agents, for example 3-methacryloxypropyl trimethoxysilane (MPS). In many resin composites, the molecule has silanol groups at one end and methacrylate groups at the other. These molecules form covalent bonds to the silicon–oxygen groups of the filler particles and the methacrylate groups of the resin (Ferracane, 1995). When silane is deposited on the filler particle, the methoxy groups hydrolyse to hydroxy groups, which react with water or hydroxyl-radical groups on the filler. The carbon double bonds of the silane react with the resin and form a continuous bond between the filler particles and the resin matrix via the coupling agent. These bonds degrade when exposed to water intraorally (Powers and Sakaguchi, 2006).

Initiators and Accelerators

The majority of resin composites are light-cured. Polymerisation is initiated when the material is exposed to a blue light with a wavelength of around 470 nm. The light is absorbed by a photoactivator, often camphorquinone, which together with an aromatic amine initiates the polymerisation reaction.

Some resin composites are dual-cured, where polymerisation is commenced by exposure to blue light but the reaction continues after light exposure by the chemical reaction taking place between an organic amine and organic peroxide. This reaction produces free radicals, which react with the carbon double bonds of the resin, causing polymerisation and set of the material. Dual-cured resin composites are useful materials as core materials, where bulk placement may mean that light cannot penetrate to the full depth of the material, and thus the chemical reaction, which proceeds in the absence of light, ensures maximum polymerisation. They are also useful as luting agents for the cementation of all-ceramic crowns, porcelain-fused-to-metal crowns, posts and orthodontic brackets, all situations where full light penetration is not, or may not be, possible.

The amount of polymerisation, or degree of conversion of carbon double bonds to single bonds, varies: typically 65–80% when light-cured and 60–75% when chemically cured. Dual-cured materials may achieve up to 80% degree of conversion. The degree of conversion is clinically relevant because many of the physical and mechanical properties improve as it increases. The degree of polymerisation is affected by the length of time of exposure to the curing light, distance from the curing light, shade of composite, type of resin and filler composition.

The polymerisation reaction produces a net shrinkage of the material as the cross-linkage proceeds. The larger the volume of filler particles in a resin composite, the lower will be the shrinkage, thus microfilled composites, which have the lowest percentage volume of filler particles (Table 1-1), give the highest values of linear shrinkage: 2–3%. Hybrid composites have lower values of linear shrinkage: 0.6–1.4%.

Types of Resin Composite

Microfill Composites

Microfill resin composites are designed for use in anterior preparations, where aesthetics are the primary concern. Traditionally, they have very small silica filler particles, but the particles tend to agglomerate giving very low filler loading, and therefore low strength and wear resistance, and high polymerisation contraction, thermal expansion and water absorption. The small particle size provides good surface polish compared with resin composites with larger filler particles.

Hybrid Composites

Hybrid composites were developed as “universal” materials, with sufficiently good aesthetics to be used anteriorly but with sufficient strength and wear resistance to be also used posteriorly. Some hybrid composites are marketed specifically for posterior use. A typical hybrid composite material is shown in Fig 1-1.

Fig 1-1 Presentation of a typical hybrid resin composite restorative material, sh...

Table of contents

• Cover
• Title Page
• Copyright Page
• Table of Contents
• Foreword
• Preface
• Acknowledgements
• Chapter 1: Resin Composites
• Chapter 2: Compomers and Giomers
• Chapter 3: Enamel and Dentine Adhesive Systems
• Chapter 4: Glass-ionomer Cements
• Chapter 5: Dental Amalgam
• Chapter 6: Sealers, Lining and Base Materials
• Chapter 7: Finishing and Polishing Restorations
• Chapter 8: Dental Curing Lights
• Chemical Abbreviations
• List of Dental Manufacturers’ Websites