Innovative Pre-Treatment Techniques to Prevent Corrosion of Metallic Surfaces
- 248 pages
- English
- PDF
- Available on iOS & Android
Innovative Pre-Treatment Techniques to Prevent Corrosion of Metallic Surfaces
About This Book
There has long been a need for effective pre-treatment techniques to prevent corrosion of metallic surfaces. This important volume discusses key research on the development of pre-treatment techniques for a range of metals. Chapters review various coatings and preparation methods for aluminium and aluminium alloys such as silane films, sol-gel coatings and magnesium-rich primers. Further chapters discuss the pre-treatment methods for steel, copper and magnesium alloys. The book also assesses methods for monitoring the effectiveness of pre-treatments, covering dissolution-precipitation mechanisms and their electrochemical behaviour.Innovative pre-treatment techniques to prevent corrosion of metallic surfaces is a valuable reference for all those concerned with corrosion problems and the use of pre-treatment techniques in the coatings industry.
- Reviews coating and preparation methods for alluminium alloys
- An authoritative overview of pre-treatments for steel, copper, zinc and magnesium alloys
Frequently asked questions
Information
Table of contents
- Cover
- Innovative pre-treatment techniques to prevent corrosion of metallic surfaces
- Copyright
- Contents
- Contributor contact details
- European Federation of Corrosion (EFC) publications: Series introduction
- Volumes in the EFC series
- 1 Silane films for the pre-treatment of aluminium: film formation mechanism and curing
- 2 EIS investigation of the behaviour in 0.1 M sodium chloride solution of a double layer cerium–silane pre-treatment on Al 2024-T3
- 3 Deposition of zirconia as an adhesion promoter on Al 1050 alloy: two preparation routes
- 4 Sol–gel coatings for pitting corrosion resistance of AA 2024-T3 aluminium alloy
- 5 Magnesium-rich primers for chromate-free protective systems on Al 2024 and Al 7075
- 6 The importance of the near-surface region in the surface pre-treatment of rolled recycled aluminium
- 7 Corrosion studies and analytical characterisation of galvanised steel substrates pre-treated with doped silane solutions
- 8 Electrochemical evaluation of protection methods for galvanised steel using passivation treatments without hexavalent chromium
- 9 The effect of cerium nitrate on the corrosion behaviour of electrogalvanised steel substrates, evaluated by XPS and SVET
- 10 Inhibition of corrosion of zinc by Cr(VI) and Cr(III) treatments
- 11 Use of a surfactant to develop an aqueous conversion coating based upon zinc heptanoate
- 12 Effect of silane solution concentration on the anticorrosive protection of pretreatments applied on steel
- 13 In Situ monitoring of dissolution–precipitation mechanisms using coupled quartz crystal microbalance/atomic emission spectroelectrochemistry
- 14 Silane pre-treatments on copper to improve the adhesion of organic coatings
- 15 Improvement to the corrosion resistance of magnesium alloys by physical and chemical surface treatment
- 16 Electrochemical behaviour of Mo, MoTi and MoNb thin films obtained by physical vapour deposition
- Index