Chapter 1
GETTING STARTED
Now that youâve decided you want to compete for federal contracts, what do you have to do to be eligible? Perhaps equally important, what do you have to do to have a chance when you do compete? There are a number of steps you must take if you want to compete for a federal contract and a number you might want to take to enhance your chances of winning the competition.
REGISTRATION
Step one in competing for federal contracts is completing the registration process. In order to register, before a firm can bid on a federal contract, it must first have a âD-U-N-Sâ number. A D-U-N-S (Data Universal Numbering System) number is a nine digit number assigned by Dun & Bradstreet that is unique to a business. The service is free and it can be done online by visiting the D-U-N-S Request Service (www.dnb.com/get-a-duns-number.html).
Once a firm has its D-U-N-S number, step two is to register the business with the federal government. A bidder must be registered with the System of Award Management (SAM) in order to receive a federal contract. Go to SAM.gov to register. In registering with SAM as a potential bidder, you will complete various clauses and certifications that relate to its business. It would be a good idea to review these clauses and certifications before actually starting the registration process. It may sound trite, but itâs always easier to get it right the first time than to try and fix the mistake later (âan ounce of prevention . . .â).
NAICS Code
As part of the SAM registration, the firm will be asked to select the North American Industry Classification System (NAICS) code or codes that best describe the companyâs type of business. NAICS codes are a series of numbers maintained by the Census Bureau that describe virtually every type of business in the United States. Selection of the correct NAICS code or codes (contractors are not limited to only one NAICS code) is important because the Small Business Administration (SBA) assigns a size standard to each NAICS code. It is a firmâs primary NAICS code and the associated size standard that determines whether it is a âsmallâ business, and being a âsmallâ business can qualify a firm for certain contracting advantages. It is the stated policy of the federal government to foster the growth of small businesses in the awarding of federal contracts. One prime example: federal law requires that, for most procurements, if it is expected that at least two qualified small businesses will submit bids or offers at reasonable prices, then the procurement must be conducted as a âsmall business set-aside,â meaning only small businesses will be permitted to compete. Size standards tied to manufacturing NAICS codes are generally employee-based, meaning a firmâs size is determined by the average number of employees it had over the previous fifty-two weeks back from the date of the determination. If the NAICS code is in a retail sales or service business, the firmâs size is determined by average annual revenues over the previous three years. Determining the correct NAICS code is important because not all codes under manufacturing or service contracting have the same standards. For instance, while most codes for clothing manufacturers establish five hundred employees as the standard for qualifying as a small business, for shoe manufacturers the employee total is one thousand, or twice the total for other clothing manufacturers. As another example, for household appliance stores the size standard is $10 million in annual sales, while for electronics stores, it is $30 million.
It would be a good idea to study the NAICS codes before commencing the registration process, just as it was with the various clauses and certifications. The complete list of NAICS codes can be found on the United States Census Bureauâs NAICS website. SBAâs website (www.sba.gov) maintains the list of NAICS codes with their corresponding size standards. Always bear in mind that a firmâs size is not permanent. A bidder may qualify as small when it initially registers with SAM; that does not mean it will always qualify as small. A small business will need to monitor its average number of employees or revenues as the case may be, for when it submits a bid or an offer on a procurement that is set aside for small businesses exclusively, it must certify that it is a small business at the time it submits the bid or offer. Falsely certifying status as a small business can have serious consequences. See Chapter 4 for more details.
Status Designations
As part of the registration process, a potential bidder will have the opportunity to designate its status for a number of government programs designed to benefit small businesses. There are, however, certain programs for which a company will need to submit an application and be certified for participation. In addition to designating itself as a small business, a business may designate itself as a Small Disadvantaged Business (SDB), a Woman-Owned Small Business (WOSB), Economically Disabled Woman-Owned Small Business (EDWOSB), a Veteran-Owned Small Business (VOSB), or a Service-Disabled Veteran-Owned Small Business (SDVOSB). To determine if a business qualifies to self-certify for one or more of these programs, go to SBAâs website at www.sba.gov.
Among the programs that require certification by a government agency in order for a firm to participate, there is the SBA 8(a) Program for qualified minority-owned small businesses. Admission to the 8(a) Program will allow a firm to compete for certain contracts exclusively against other minority-owned small businesses participants. It may even allow a participant to receive certain contract awards without competition, up to a maximum value of $3 million for service contracts and $5 million for supply contracts. Assuming a participant continues to comply with the rules governing the 8(a) Program, it can participate for nine years before it must âgraduate.â The WOSB/EDWOSB Program operates in a manner similar to the 8(a) Program. A participant must be certified by SBA or a designated third party certifier in order to compete in a competition set aside for WOSBs or EDWOSBs.
Another beneficial program, but one which requires certification by the SBA, is the Historically Under-Utilized Business Zone or HUBZone Program. HUBZone businesses are small businesses located in areas (corresponding to census tracts) that have had a continuous record of high unemployment. Small businesses in those areas that meet certain eligibility requirements can compete in procurements set aside exclusively for HUBZone small businesses. Additionally, it is a requirement of federal law that HUBZone businesses competing in âunrestrictedâ procurements (procurements open to bidders of all sizes) receive a 10 percent price evaluation preference over their large business competitors. In other words, if a HUBZone bidderâs price is within 10 percent of a large businessâs low price, the HUBZone businessâs price is considered to be the lower one, even though the HUBZone business would still receive that contract at the price it bid. See Chapter 4 for more details. To determine if a business is located in a HUBZone, go to www.sba.gov/hubzone and enter the address. The website will then show if the business is located in a HUBZone. There is no time limit for the HUBZone Program. A participant can remain a HUBZone business for as long as it remains small, its location remains in an area designated by the Census Bureau as a HUBZone, and it continues to meet the other eligibility requirements.
Finally, VOSB and SDVOSB contracting is worthy of a mention. While setting procurements aside for VOSBs or SDVOSBs is discretionary for most federal agencies, the Department of Veterans Affairs (VA) is required to set aside a procurement exclusively for SDVOSBs if it is expected that at least two such businesses will submit qualified bids. However, while an offeror can self-certify as a SDVOSB or VOSB for set-aside competitions conducted by other government agencies (subject to review by SBA in the event of a challenge), in order to bid in a VA competition set aside for SDVOSBs or VOSBs, the offeror must be certified by the VAâs Center for Veterans Enterprise (CVE). A good informational site is www.va.gov/osdbu/entrepreneur.
WHERE TO FIND OFFERS
Any procurement expected to exceed $2,500 (with certain exceptions set out in FAR 5.202) is publicized, at least initially (a reader may be directed to an individual agencyâs website for future developments), by way of a notice on the Federal Business Opportunity or FedBizOps website (www.fbo.gov). The site is set up with ninety-nine two-digit codes for the various types of supplies the federal government procures (with Code 99 being âMiscellaneousâ) and twenty-six letter codes for services (including lease or purchase of real property). The site allows potential bidders, by clicking âFind Opportunitiesâ and then using the âOpportunities Listâ box, to search through all the opportunities (literally hundreds of postings each day) or, by using âAdvanced Search,â check those codes that relate to particular types of products or services. Be aware, though, the posting of an opportunity and the selection of the code under which the announcement will be posted is the function of a procurement official at the particular agency. I have seen some strange postings over the years, such as a recent posting by a Department of Veterans Affairs Medical Center announcing a procurement of âparking gates, barriers with installation training.â That announcement, strangely, was posted under Code 84, âClothing, individual equipment, and insignia.â That is why it is always smart to check Code 99 (âMiscellaneousâ). In my experience, when the posting person is unsure of which code to use, the announcement often gets posted under Code 99. Also, check any code that might remotely relate to your product or service. As an example, Code 70 covers âGeneral purpose information technology equipment,â while Code D covers âInformation technology services, including telecommunication services.â Yet, you are likely on occasion to see an information technology service competition posted under Code 70 or an information technology hardware competition posted under Code D.
Potential bidders should be sure to sign on as an âInterested Vendorâ for any procurement announcement that interests them. There are often many substantive changes to solicitations (referred to as âamendmentsâ; changes to contracts are called âmodificationsâ) or the due date for bids may be postponed. A potential bidder that has registered as an Interested Vendor will receive notices automatically instead of having to monitor the particular opportunity constantly. While it is not necessary in order to view opportunities, a potential bidder needs to register its business with the FedBizOps website and set up a password so that it can log in. Offerors need to log in to sign up for announcements regarding a particular procurement. Also, by logging in, a bidder can access the list of other businesses that have signed up as Interested Vendors who may be potential competitors or potential teaming partners.
GETTING TO KNOW THE AGENCY CONTRACTING PEOPLE
If you locate a particular government-procuring agency that makes regular purchases of your products or services, it may be worth paying that agency a visit. Pick a contracting officer from a FedBizOps announcement and contact that person. Tell him or her that you are new to government contracting, that you are interested in doing business with their agency, and would like to pay a visit. Most contracting people will welcome the contact, and while you are there you will have the opportunity to meet other contracting officers. None of this will get you a contract that you are not otherwise entitled to receive, but there will be issues that will arise from time to time necessitating that you deal with one or more of those individuals. Knowing the faces that go with the names can only enhance their cooperation. Indeed, our firm has clients who make it a point to visit their primary contracting agency on a regular basis.
Another source for potential contacts is an agency small-business event. Most agencies will have several such events during the course of a year, spread out throughout the country at the agencyâs various offices. Sometimes these events are geared toward specific small businesses such as veteran-owned or woman-owned, but mainly they are open to any small business interested in doing business with that agency. In addition to agency representatives in attendance, there will usually be representatives of large business contractors looking for potential small businesses subcontractors in order to comply with their small business subcontracting plan. The announcements for these events are posted on FedBizOps, usually under Code 99, Miscellaneous.
DEALING WITH GOVERNMENT OFFICIALS
When dealing with government officials, bidders need always to keep in mind that many practices common in the commercial world are not allowed in the world of government contracting. There is a federal criminal statute, 18 U.S.C. § 1001, which makes it a criminal offense to make a false statement to a government official regarding any matter considered âmaterial.â While everyone is aware of the crime of perjury (lying under oath), it is just as much of a felony to make a false statement (or submit a false document) to a government official in connection with the performance of his duties, even though the statement may not have been made under oath. In addition to criminal penalties associated with making false statements to government officials, doing so in an effort to attain a government contract can have dire consequences. Under the False Claims Act (FCA), each and every invoice submitted during performance of a contract procured by the use of false statements is a separate violation punishable by a fine of not less than $5,500 and not more than $11,000. It does not matter that the government contracting officials knew the statements were false or that the government suffered no damages as a result of the statements, the subsequent submission of an invoice constitutes a violationâeven if the invoice itself is perfectly proper.
Authority of Government Employees in Contract Awards
For a business electing to compete for federal contracts, there are some basic rules that are absolutely critical. First and foremost, unlike the commercial world, there is no âapparent authorityâ when it comes to government employees. If a government employee acts outside of the limits of his or her authority, the government is not bound by their actions. Thus, irrespective of whether a government employeeâs title would suggest certain authority, the burden is on the person dealing with that employee to verify that the employee has the authority to do whatever it is he or she is doing. This also means a bidder cannot rely on any advice given by a government employee unless the bidder verifies that the employeeâs position authorizes him or her to give advice.
The most common situation where authority comes into question is in the area of government contracts, both in the award and in the performance. For example, every contracting officer holds a âwarrant,â i.e., an authorization to enter into contracts that bind the government. However, there are different dollar levels to warrants. One contracting officer may have a $500,000 limit on contracting authority, while another might have $10,000,000 limit. Only a contracting officer with what is called a âwarrantâ can bind the government to a contract, and then only to the monetary limit of their warrant. A company may have a document that appears to be a contract, but unless it was signed by a contracting officer acting within the limit of his or her warrant, it does not have anything more than a piece of paper. A situation I was asked to review occurred a few years ago when a catering company was âhiredâ by a member of the Maryland National Guard (MNG) to provide meals to the MNG during its two-week summer camp at Fort Indiantown Gap, Pennsylvania. The company provided the meals for the two weeks and sent a bill to the MNG. The MNG responded that the person who hired the company was not an authorized contracting officer. The MNG informed the company that it was not responsible and that the bill should be sent to Fort Indiantown Gap for payment. Officials at Fort Indiantown Gap refused to pay the bill, since no one there had hired the firm. In the end the company was never paid. The person who hired the firm lacked contracting authority.
Want an even more outrageous example? In one well-known case, agents of the Immigration and Naturalization Service (INS) had intercepted a truckload of illegal aliens trying to cross the border from Mexico. Several of the aliens were injured in the chase, and the agents took the injured to the nearest hospital. The agents requested that the hospital treat the injured, and assured the hospital personnel that the federal government would be responsible for the bill. When the hospital sought payment, INS refused to pay on the ground that none of the agents was a contracting officer. The hospital sued the government, but in the end lost, because the agents who requested that the hospital treat the aliens lacked contracting authority.
While each contracting officerâs warrant defines his or her contracting authority, there are certain actions that, by law, no government official can take. For example, no government official has the authority to enter into a contract in violation...